/*****************************************************************************
*
* File Name : wm_demo_cmd.h
*
* Description: demo command header
*
* Copyright (c) 2014 Winner Micro Electronic Design Co., Ltd.
* All rights reserved.
*****************************************************************************/
#ifndef __WM_DEMO_CMD_H__
#define __WM_DEMO_CMD_H__

#include <string.h>
#include "wm_include.h"
#include "wm_watchdog.h"
#include "wm_config.h"

/*****************************************************************
	EXTERN FUNC
*****************************************************************/
extern int demo_connect_net(void *, ...);
extern int demo_socket_client(void *, ...);
extern int demo_socket_server(void *, ...);
extern int demo_oneshot(void *, ...);
extern int demo_socket_config(void *, ...);
extern int demo_webserver_config(void *, ...);
extern int demo_create_softap(void *, ...);
extern int uart_demo(void *, ...);
extern int ntp_demo(void *, ...);
extern int ntp_set_server_demo(void *, ...);
extern int ntp_query_cfg(void *, ...);
extern int flash_demo(void *, ...);
extern int Socket_Client_Demo(void *, ...);
extern int sck_c_send_data_demo(void *, ...);
extern int socket_server_demo(void *, ...);
extern int sck_s_send_data_demo(void *, ...);
extern int socket_udp_demo(void *, ...);
extern int udp_send_data_demo(void *, ...);

extern int apsta_demo(void *, ...);
extern int apsta_socket_demo(void *, ...);
extern int gpio_demo(void *, ...);
extern int gpio_isr_test(void *, ...);
extern int pwm_demo(void *, ...);
extern int crypt_hard_demo(void *, ...);
extern int wm_7816_demo(void *, ...);
extern int rsa_demo(void *, ...);
extern int slave_spi_demo(void *, ...);
//extern int master_spi_demo(void *, ...);
extern int master_spi_recv_data(void *, ...);
extern int master_spi_send_data(void *, ...);
extern int pmu_timer0_demo(void *, ...);
extern int pmu_timer1_demo(void *, ...);
extern int rtc_demo(void *, ...);
extern int timer_demo(void *, ...);
extern int http_fwup_demo(void *, ...);
extern int http_get_demo(void *, ...);
extern int http_post_demo(void *, ...);
extern int http_put_demo(void *, ...);
extern int socket_server_demo(void *, ...);
extern int sck_s_send_data_demo(void *, ...);
extern int CreateMCastDemoTask(void *, ...);
extern int adc_input_voltage_demo(void *, ...);
extern int adc_chip_temperature_demo(void*,...);
extern int sd_card_test(void *, ...);

extern int demo_wps_pbc(void *, ...);
extern int demo_wps_pin(void *, ...);
extern int demo_wps_get_pin(void *, ...);


extern int demo_iperf_auto_test(void *, ...);
extern int CreateSSLServerDemoTask(void *, ...);
extern int lwsDemoTest(void *, ...);
extern int tls_i2s_io_init(void);
extern int tls_i2s_demo(void *, ...);
extern int i2c_demo(void *, ...);
extern int scan_demo(void *, ...);

extern int https_demo(void *, ...);
extern int mqtt_demo(void *, ...);
extern int fatfs_test(void *, ...);
extern int mbedtls_demo(void *, ...);

extern int dsp_demo(void *,...);

#if DEMO_BT
extern int demo_bt_enable(void *, ...);
extern int demo_bt_destroy(void *, ...);
#if (TLS_CONFIG_BLE == CFG_ON)
extern int demo_ble_server_on(void *, ...);
extern int demo_ble_server_off(void *, ...);
extern int demo_ble_client_on(void *, ...);
extern int demo_ble_client_off(void *, ...);

extern int demo_ble_scan(void *,...);
extern int demo_ble_adv(void *,...);
#endif

#if (TLS_CONFIG_BR_EDR== CFG_ON)
extern int demo_bt_app_on(void *, ...);
extern int demo_bt_app_off(void *, ...);
#endif

#endif

#if DEMO_TOUCHSENSOR
extern int demo_touchsensor(void *, ...);
#endif

/*****************************************************************
		LOCAL FUNC
*****************************************************************/
static void demo_console_show_info(char *buf);
static int demo_console_show_help(void *p, ...);
static int  demo_sys_reset(void *p, ...);

/*****************************************************************
		LOCAL TYPE
*****************************************************************/
typedef struct demo_console_st
{
    int rx_data_len;
    u8 *rx_buf;		/*uart rx*/
    u16 rptr;
    u8 MsgNum;
} Demo_Console;

struct demo_console_info_t
{
    char *cmd;
    int (*callfn)(void *, ...);
    short type;/* perbit: 0-string, 1-number */
    short param_cnt;
    char *info;
};

#define DEMO_CONSOLE_CMD		1		//��������cmd
#define DEMO_CONSOLE_SHORT_CMD	2		//CMD��һ���֣�û�н�����
#define DEMO_CONSOLE_WRONG_CMD  3

#define DEMO_BUF_SIZE		TLS_UART_RX_BUF_SIZE

const char HTTP_POST[] = "t-httppost";
const char HTTP_PUT[] = "t-httpput";


struct demo_console_info_t  console_tbl[] =
{
    //To Do When Add New Demo
#if DEMO_CONNECT_NET
    {"t-connect", 	demo_connect_net, 0, 2, "Test connecting ap;t-connect(\"ssid\",\"pwd\"); For open ap, pwd should be empty"},
    {"t-oneshot",     demo_oneshot,  0, 0, "Test Oneshot  configuration"},
    //	{"t-socketcfg",  demo_socket_config, 0, 0, "Test socket configuration"},
    {"t-webcfg",      demo_webserver_config, 0, 0, "Test web server configuration"},
#endif

#if DEMO_APSTA
    {"t-apsta", 	apsta_demo, 0x0, 4, "Test connecting with AP by apsta mode;"},
    {"t-asskt", 	apsta_socket_demo, 0x0, 0, "Test socket communication in apsta mode;"},
#endif

#if DEMO_SOFT_AP
    {"t-softap", 	demo_create_softap, 0x1C, 5, "Test softap create & station join monitor;"},
#endif

#if DEMO_WPS
    {"t-wps-get-pin",  demo_wps_get_pin,   0x0,    0, "Test WPS get pin"},
    {"t-wps-start-pin",  demo_wps_pin,   0x0,    0, "Test WPS start pin"},
    {"t-wps-start-pbc",  demo_wps_pbc,   0x0,    0, "Test WPS start pbc"},
#endif

#if DEMO_SCAN
    {"t-scan",	scan_demo,	0x0,	0,  "Test wifi scan"},
#endif

/************************************************************************/

#if DEMO_UARTx
    {"t-uart", 	uart_demo, 0x7, 3, "Test uart tx/rx; For example t-uart=(9600,0,0),baudrate 9600 ,parity none and 1 stop bit"},
#endif

#if DEMO_GPIO
    {"t-gpioirq", 	gpio_isr_test,	0x0,    0, "Test gpio interrupt services"},
    {"t-gpio", 	    gpio_demo,	    0x0,    0, "Test gpio read and write"},
#endif

#if DEMO_FLASH
    {"t-flash", 	flash_demo,		0x0, 0, 	"Test Read/Write Flash "},
#endif

#if DEMO_ENCRYPT
    {"t-crypt",   	crypt_hard_demo,	0x0,    0, "Test Encryption/Decryption API"},
#endif

#if DEMO_RSA
    {"t-rsa",   	rsa_demo,	0x0,    0, "Test RSA Encryption/Decryption API"},
#endif

#if DEMO_RTC
    {"t-rtc",  rtc_demo,   0x0,    0, "Test rtc"},
#endif

#if DEMO_TIMER
    {"t-timer",  timer_demo,   0x0,    0, "Test timer"},
#endif

#if DEMO_PWM
    {"t-pwm",   	pwm_demo,	0x1F,    5, "Test PWM output, for example t-pwm=(0,20,99,1,0) to test ALLSYC mode."},
#endif

#if DEMO_PMU
    {"t-pmuT0",   	pmu_timer0_demo,	0x1,    1, "Test power management unit with timer0"},
    {"t-pmuT1",   	pmu_timer1_demo,	0x1,    1, "Test power management unit with timer1"},
#endif

#if DEMO_I2C
    {"t-i2c",   	i2c_demo,	0x1,    1, "Test I2C module, for example t-i2c to W&R AT24CXX."},
#endif

#if DEMO_I2S
    {"t-i2sioinit", tls_i2s_io_init,	0,    0, "Initialize I2S IO."},
    {"t-i2s",   	tls_i2s_demo,	0x3F,    6, "Test I2S module, for example t-i2s=(0,1,44100,16,0,0) to send data."},
#endif

#if DEMO_MASTER_SPI
    {"t-mspi-s", 	master_spi_send_data, 0x3, 2,   "Test SPI Master sending data(Note: need another module acts as a client device)"},
    {"t-mspi-r", 	master_spi_recv_data, 0x3, 2,   "Test SPI Master receiving data(Note: need another module acts as a client device)"},
#endif

#if DEMO_SLAVE_SPI
    {"t-sspi", 	slave_spi_demo, 0x1, 1,   "Test slave HSPI,t-sspi=(0),(Note: need another module support as a master device)"},
#endif

#if DEMO_SDIO_HOST
    {"t-sdh",  sd_card_test,   0x0,    0, "Test sdio host write & read sd card"},
#endif

#if DEMO_ADC
    {"t-adctemp",  adc_chip_temperature_demo,   0x0,    0, "(ADC)Test chip temperature"},
    {"t-adcvolt",  adc_input_voltage_demo,   0x1,    1, "(ADC)Test input voltage,0-PA1(chan0), 1-PA4(chan1),8-different"},    
#endif

#if DEMO_7816
	{"t-7816",	wm_7816_demo,	0x0,	0, "Test 7816 tx/rx function"},
#endif

/************************************************************************/

#if DEMO_STD_SOCKET_CLIENT
    {"t-sockc", 	Socket_Client_Demo,	0x1,    2, "Test data stream as [STANDARD SOCKET] CLIENT(working after connecting with AP successfully)"},
    {"t-skcsnd", 	sck_c_send_data_demo,	0x3,    2, "Test socket client send data, len:send len, uart_trans: is or not use uart retransmission"},
#endif

#if DEMO_STD_SOCKET_SERVER
    {"t-socks", 	socket_server_demo,	0x1,    1, "Test data stream as [STANDARD SOCKET] SERVER(working after connecting with AP successfully)"},
    {"t-skssnd", 	sck_s_send_data_demo,	0x7,    3, "Test socket server send data skt_no:socket num, len:send len, uart_trans: is or not use uart retransmission"},
#endif

#if DEMO_SOCKET_CLIENT_SERVER
	{"t-client",    demo_socket_client,0x4,4,"Test socket client; t-client(\"ssid\",\"pwd\",port,\"ip\")"},
	{"t-server",    demo_socket_server,0x4,3,"Test socket server; t-server(\"ssid\",\"pwd\",port,)"},
#endif

#if DEMO_UDP
    {"t-udp",   	socket_udp_demo,	0x3,    3, "Test data stream as UDP(working after connecting with AP successfully)"},
    {"t-sndudp",   	udp_send_data_demo,	0x1,    1, "Test udp send data"},
#endif

#if DEMO_UDP_MULTI_CAST
	{"t-mcast", CreateMCastDemoTask,	0x0,	1, "Test Multicast data stream"},
#endif

#if DEMO_NTP
    {"t-ntp", 	ntp_demo, 0x0, 0,   "Test NTP"},
    {"t-setntps", ntp_set_server_demo, 0x0, 3, "Set NTP server ip;For example:t-setntps(\"cn.ntp.org.cn\", \"ntp.sjtu.edu.cn\", \"192.168.1.101\"),max server num is 3"},
    {"t-queryntps", ntp_query_cfg, 0x0, 0, "Query the NTP server domain"},
#endif

#if DEMO_HTTP
    {"t-httpfwup",  http_fwup_demo,	0x0,    1, "Test firmware update via HTTP, like this t-httpfwup=(http://192.168.1.100:8080/xt804_SEC.img)"},
    {"t-httpget", 	http_get_demo,	0x0,    1, "Test HTTP get method, like this t-httpget"},
    {(char *)HTTP_POST,  http_post_demo,	0x0,    1, "Test HTTP post method, like this t-httppost=(user=winnermicro)"},
    {(char *)HTTP_PUT,   http_put_demo,  0x0,    1, "Test HTTP put method, like this t-httpput=(user=winnermicro)"},
#endif

#if DEMO_SSL_SERVER
    {"t-ssl-server",  CreateSSLServerDemoTask,   0x0,    1, "Test ssl server,remember to turn on TLS_CONFIG_SERVER_SIDE_SSL"},
#endif

#if DEMO_WEBSOCKETS
    {"t-websockets", lwsDemoTest, 0x0,    0, "websockets demo test"},
#endif

#if DEMO_HTTPS
    {"t-https",	https_demo,	0x0,	0,  "Test https request"},
#endif

#if DEMO_MBEDTLS
    {"t-mbedtls",	mbedtls_demo,	0x0,	0,  "Test mbedtls ssl"},
#endif

#if DEMO_MQTT
    {"t-mqtt",	mqtt_demo,	0x0,	0,  "Test mqtt"},
#endif

#if DEMO_FATFS
	{"t-fatfs",	fatfs_test,	0x0,	0,  "Test fatfs on sd card"},
#endif 

#if DEMO_IPERF_AUTO_TEST
	{"t-iperf",  demo_iperf_auto_test,	 0x7E,	  7, "Iperf auto test"},
#endif

#if DEMO_DSP
	{"t-dsp",  dsp_demo,	 0x1,	  1, "DSP demo:0-fir,1-matrix,2-rfft,3-sin,4-variance"},
#endif

#if DEMO_BT
    {"t-bt-on",	demo_bt_enable,	0x0,	0,                  "Test enable bt system"},
    {"t-bt-off",	demo_bt_destroy,	0x0,	0,          "Test destroy bt system"},
#if (TLS_CONFIG_BLE == CFG_ON)    
    {"t-ble-server-on",	demo_ble_server_on,	0x0,	0,      "Test enable ble server"},
    {"t-ble-server-off",	demo_ble_server_off,	0x0,	0,  "Test disable ble server"},
    {"t-ble-client-on",	demo_ble_client_on,	0x0,	0,      "Test enable ble client"},
    {"t-ble-client-off",	demo_ble_client_off,	0x0,	0,  "Test disable ble client"},
    {"t-ble-adv", demo_ble_adv, 0x01, 1, "Test start connectable/unconnectable/stop ble advertisement,eg: t-ble-adv=(1/2/0)"},
    {"t-ble-scan",demo_ble_scan, 0x01, 1, "Test start/stop ble scan,eg: t-ble-scan=(1/0)"},
#endif  

#if (TLS_CONFIG_BR_EDR == CFG_ON)    
    {"t-bt-demo-on",	demo_bt_app_on,	0x0,	0,      "Test enable bt app on"},
    {"t-bt-demo-off",	demo_bt_app_off,	0x0,	0,  "Test disable bt app off"},
#endif 

#endif

#if DEMO_TOUCHSENSOR
	{"t-touch", demo_touchsensor, 0x1, 1, "Test Touch sensor function,0:all, 1:touch sensor 1... 15:touch sensor 15"},
#endif

    //����̨����ʾ�����һ��������Ҫ��������ʾ�ڿ���̨�ϣ���Ҫ���ڸ��е�����
    {"demohelp", 	demo_console_show_help,	0, 0,	"Display Help information"},
    //��������������ڲ����ԣ�����ʾ�ڿ���̨��
    {"reset", 		demo_sys_reset, 0, 0, "Reset System"},
    //���һ�������������ʱ�жϽ�����ʶ
    {"lastcmd", 	NULL,	0, 0,			"Table Terminal Flag; MUST BE THE LAST ONE"}
};

static void demo_console_show_info(char *buf)
{
    char *p = NULL;
    char *p1 = NULL;

    p = buf;
    p1 = strchr(p, '\n');
    if(NULL == p1)
    {
        printf("%s\n", p);
        return;
    }

    while(p1 != NULL)
    {
        *p1 = '\0';
        printf("%s\n", p);
        printf("%-30s", "   ");
        p = p1 + 1;
        p1 = strchr(p, '\n');
    }
    printf("%s\n", p);
}

static int demo_console_show_help(void *p, ...)
{
    int i;

    printf("\n%-10s", "Sequence");
    printf("%-20s", "Command");
    printf("%s", "Description");
    printf("\n------------------------------------------------------------------------------------\n");
    for(i = 0; ; i ++)
    {
        printf("%-10d", i + 1);
        printf("%-20s", console_tbl[i].cmd);
        //printf("%s\n",console_tbl[i].info);
        demo_console_show_info(console_tbl[i].info);
        if(0 == strcmp(console_tbl[i].cmd, "demohelp"))
            break;
    }
    printf("------------------------------------------------------------------------------------\n");

    return WM_SUCCESS;
}

int demo_sys_reset(void *p, ...)
{
    tls_sys_reset();
    return WM_SUCCESS;
}

#endif /*__WM_DEMO_CMD_H__*/