1 В избранное 0 Ответвления 0

OSCHINA-MIRROR/openLuat-luatos-soc-air101

Присоединиться к Gitlife
Откройте для себя и примите участие в публичных проектах с открытым исходным кодом с участием более 10 миллионов разработчиков. Приватные репозитории также полностью бесплатны :)
Присоединиться бесплатно
Это зеркальный репозиторий, синхронизируется ежедневно с исходного репозитория.
Клонировать/Скачать
wm_efuse.h 6.7 КБ
Копировать Редактировать Web IDE Исходные данные Просмотреть построчно История
Wendal Chen Отправлено год назад 0cadee8
/**
* @file wm_efuse.h
*
* @brief virtual efuse Driver Module
*
* @author dave
*
* Copyright (c) 2014 Winner Microelectronics Co., Ltd.
*/
#ifndef WM_EFUSE_H
#define WM_EFUSE_H
#define TLS_EFUSE_STATUS_OK (0)
#define TLS_EFUSE_STATUS_EINVALID (1)
#define TLS_EFUSE_STATUS_EIO (2)
enum {
CMD_WIFI_MAC = 0x01,
CMD_WIFI_MACAP,
CMD_BT_MAC,
CMD_TX_DC,
CMD_RX_DC,
CMD_TX_IQ_GAIN,
CMD_RX_IQ_GAIN,
CMD_TX_IQ_PHASE,
CMD_RX_IQ_PHASE,
CMD_TX_GAIN,
CMD_TX_ADC_CAL,
CMD_FREQ_ERR,
CMD_RF_CAL_FLAG,
CMD_ALL,
};
#define FREQERR_ADDR (FT_MAGICNUM_ADDR + sizeof(FT_PARAM_ST))
#define FREQERR_LEN (4)
#define CAL_FLAG_ADDR (FT_MAGICNUM_ADDR + sizeof(FT_PARAM_ST)+4)
#define CAL_FLAG_LEN (4)
//#define TX_GAIN_NEW_ADDR (VCG_ADDR+VCG_LEN)
#define TX_GAIN_LEN (28*3)
typedef struct FT_ADC_CAL_UNIT
{
unsigned short ref_val;
unsigned short real_val;
}FT_ADC_CAL_UINT_ST;
typedef struct FT_ADC_CAL
{
unsigned int valid_cnt;
FT_ADC_CAL_UINT_ST units[6];
float a;
float b;
}FT_ADC_CAL_ST;
typedef struct FT_TEMP_CAL
{
int ref_val;
int real_val;
}FT_TEMP_CAL_ST;
/**
* @defgroup Driver_APIs Driver APIs
* @brief Driver APIs
*/
/**
* @addtogroup Driver_APIs
* @{
*/
/**
* @defgroup EFUSE_Driver_APIs EFUSE Driver APIs
* @brief EFUSE driver APIs
*/
/**
* @addtogroup EFUSE_Driver_APIs
* @{
*/
/**
* @brief This function is used to init ft param.
*
* @param[in] None
*
* @retval TRUE init success
* @retval FALSE init failed
*/
int tls_ft_param_init(void);
/**
* @brief This function is used to write ft_param.
*
* @param[in] opnum ft cmd
* @param[in] data data pointer
* @param[in] len len to write data
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_ft_param_set(unsigned int opnum, void *data, unsigned int len);
/**
* @brief This function is used to read ft_param.
*
* @param[in] opnum ft cmd
* @param[in] data data pointer
* @param[in] len len to read data
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_ft_param_get(unsigned int opnum, void *data, unsigned int rdlen);
/**
* @brief This function is used to get mac addr
*
* @param[in] mac mac addr,6 byte
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_mac_addr(u8 *mac);
/**
* @brief This function is used to set mac addr
*
* @param[in] mac mac addr,6 byte
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_mac_addr(u8 *mac);
/**
* @brief This function is used to get bluetooth mac addr
*
* @param[in] mac mac addr,6 byte
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_bt_mac_addr(u8 *mac);
/**
* @brief This function is used to set bluetooth mac addr
*
* @param[in] mac mac addr,6 byte
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_bt_mac_addr(u8 *mac);
/**
* @brief This function is used to get tx gain
*
* @param[in] txgain tx gain,12 byte
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_tx_gain(u8 *txgain);
/**
* @brief This function is used to set tx gain
*
* @param[in] txgain tx gain,12 byte
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_tx_gain(u8 *txgain);
/**
* @brief This function is used to get tx lod
*
* @param[in] txlo tx lod
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_tx_lo(u8 *txlo);
/**
* @brief This function is used to set tx lod
*
* @param[in] txlo tx lod
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_tx_lo(u8 *txlo);
/**
* @brief This function is used to get tx iq gain
*
* @param[in] txGain
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_tx_iq_gain(u8 *txGain);
/**
* @brief This function is used to set tx iq gain
*
* @param[in] txGain
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_tx_iq_gain(u8 *txGain);
/**
* @brief This function is used to get rx iq gain
*
* @param[in] rxGain
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_rx_iq_gain(u8 *rxGain);
/**
* @brief This function is used to get rx iq gain
*
* @param[in] rxGain
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_rx_iq_gain(u8 *rxGain);
/**
* @brief This function is used to get tx iq phase
*
* @param[in] txPhase
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_tx_iq_phase(u8 *txPhase);
/**
* @brief This function is used to set tx iq phase
*
* @param[in] txPhase
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_tx_iq_phase(u8 *txPhase);
/**
* @brief This function is used to get rx iq phase
*
* @param[in] rxPhase
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_rx_iq_phase(u8 *rxPhase);
/**
* @brief This function is used to set rx iq phase
*
* @param[in] rxPhase
*
* @retval TLS_EFUSE_STATUS_OK set success
* @retval TLS_EFUSE_STATUS_EIO set failed
*/
int tls_set_rx_iq_phase(u8 *rxPhase);
/**
* @brief This function is used to set/get freq err
*
* @param[in] freqerr (Unit:Hz),relative to base frequency(chan 1,2,3,4,5......13,14)
* @param[in] flag 1-set 0-get
* @retval TLS_EFUSE_STATUS_OK set/get success
* @retval TLS_EFUSE_STATUS_EIO set/get failed
*/
int tls_freq_err_op(u8 *freqerr, u8 flag);
/**
* @brief This function is used to set/get cal finish flag
*
* @param[in] calflag 1- finish calibration, non-1-do not calibration
* @param[in] flag 1-set 0-get
*
* @retval TLS_EFUSE_STATUS_OK set/get success
* @retval TLS_EFUSE_STATUS_EIO set/get failed
*/
int tls_rf_cal_finish_op(u8 *calflag, u8 flag);
/**
* @brief This function is used to get adc cal param
*
* @param[out] adc_cal adc cal param
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_get_adc_cal_param(FT_ADC_CAL_ST *adc_cal);
/**
* @brief This function is used to set adc cal param
*
* @param[out] adc_cal adc cal param
*
* @retval TLS_EFUSE_STATUS_OK get success
* @retval TLS_EFUSE_STATUS_EIO get failed
*/
int tls_set_adc_cal_param(FT_ADC_CAL_ST *adc_cal);
/**
* @}
*/
/**
* @}
*/
#endif /* WM_EFUSE_H */

Комментарий ( 0 )

Вы можете оставить комментарий после Вход в систему

1
https://gitlife.ru/oschina-mirror/openLuat-luatos-soc-air101.git
git@gitlife.ru:oschina-mirror/openLuat-luatos-soc-air101.git
oschina-mirror
openLuat-luatos-soc-air101
openLuat-luatos-soc-air101
master